Nortel 400 Using Manual Download Page 140

Page: 140 / 344

140

Chapter 5 Advanced IP configuration

300868-G

Click OK.

The Server Publication configuration dialog box closes and returns you to the
Server Publication dialog box

(Figure 65)

Click OK.

Choose Support > Other Settings

(Figure 68)

The Other Settings dialog box opens.

Figure 68 Other Settings dialog box

Enter the name under “Notify DNS Server of dial-up interface address
change.

This is the FQDN of the Web server.

In this example, use the name, “iibox.dynamic.myzone.com.”

Enter the DNS address of the Dynamic DNS server.

In this example, use the DNS address, “192.122.98.75.”

Click OK.

In the main Setup window, click Save and Exit.

Summary of Contents for 400

























































































































































































































































































































































Search results

Summary of Contents for 400

Reviews:

Brands by name

Popular brands

Nortel 400, Using Manual

Search results

Summary of Contents for 400

Reviews:

Brands by name

Popular brands