Nortel 400 Using Manual Download Page 87

Page: 87 / 344

Chapter 2 User access administration

Using the BayStack Instant Internet Management Software Version 7.11

Figure 44 Change User Access dialog box

Configure News Group access to allow access to all news groups.

Refer to

“Managing news group access” on page 70

for more information.

Configure Incoming Ports to allow access to all ports and Both TCP and UDP.

Refer to

“Managing incoming port access” on page 76

for more information.

After you complete the previous steps, all users follow the Everyone Group access
settings.

Note:

If a user’s individual access settings are more restrictive than the

Everyone Group settings, Instant Internet uses the more restrictive access
settings.

Summary of Contents for 400

























































































































































































































































































































































Search results

Summary of Contents for 400

Reviews:

Related manuals for 400

Brands by name

Popular brands

Nortel 400, Using Manual

Search results

Summary of Contents for 400

Reviews:

Related manuals for 400

Brands by name

Popular brands