Nikon NWL860 Series, Manual

Page: 78 / 96

75
Chapter 4 Communications Specification
4
9005 = Indexer pod has been unlocked
(abnormal). OFF
9010 = MSC interlock is enabled. OFF
9012 = MSC interlock is disabled. OFF
9097 = Indexer error occurs. OFF
9098 = Indexer error is canceled. OFF
Message Variable
S2F35
S2F37
S6F11
S6F15
CEID Format: 52
(2-byte integer)
Constant Format
Message Variable
S1F14 COMMACK Establish communications acknowledge code, 1
byte
0 = Accepted
1 = Denied, retry
2–63 = Reserved
Format: 10
(Binary)
Constant Format
5-12. COMMACK
Message Variable
S2F41
S2F42
CPNAME Command parameter name
Parameter name for a remote-controlled operation
performed by the NWL upon receipt of a host
remote command (RCMD). Specific operations
are defined by RCMD.
Format: 20
(ASCII)
Constant Format
5-13. CPNAME
Message Variable
S2F42 CPACK Command parameter acknowledge code
1 = The parameter name (CPNAME) does not exist.
2 = Illegal value. It is used for CPVAL.
3 = Illegal format. It is used for CPVAL.
>3 = Other equipment-specific errors
4–63 = Reserved
Format: 10
(Binary)
Constant Format
5-14. CPACK
Message Variable
S2F41 CPVAL Command parameter.
Parameter value for a remote-controlled operation
performed by the NWL upon receipt of a host
remote command (RCMD). These values are sent
along with the host command in S1F41. The
parameter names are defined by CPNAME. Specific
operations are defined by RCMD.
Format:
Depends on
CPNAME.
Constant Format
5-15. CPVAL