Nikon 4DIF User Manual Download Page 15

Page: 15 / 161

Getting to Know Nikon Capture 4 Editor

Macintosh

Turn the computer on

Turn the computer on and wait for the operating system to start up.

Start Nikon Capture 4 Editor

Double-click the Nikon Capture 4 Editor icon (

) in the folder to which you installed

Nikon Capture 4.

Prod uct Key

If prompt ed to supply a product key when starting Nikon Capture 4 Editor or Nikon Capture 4 Camera
Control, en ter the product key supplied on the Nikon Capture 4 CD case.

Mac OS 9

Dutch, Italian, Korean, and Swedish versions of Nikon Capture 4 are not available for Mac OS 9.

Oth er Ways of Starting the Editor (Mac OS)

Mac OS 9

: If an alias for Nikon Capture 4 was created on the desktop during installation, the Editor can

also be started by double-clicking the alias (

Mac OS X

: If Nikon Capture 4 was reg is tered in the Dock during installation, the Editor can also be started

by clicking the Nikon Capture 4 icon (

) in the Dock.

No image displayed in image win dow

Summary of Contents for 4DIF


































































































































































Search results

Summary of Contents for 4DIF

Reviews:

Related manuals for 4DIF

Brands by name

Popular brands

Nikon 4DIF, User Manual

Search results

Summary of Contents for 4DIF

Reviews:

Related manuals for 4DIF

Brands by name

Popular brands