Nikon 4DIF User Manual Download Page 149

Page: 149 / 161

145

The Nikon NEF Plug-in

After adjusting settings as described below, click

to open the picture. Click

Cancel

to exit

without opening the picture.

Zoom preview in.

Zoom preview out.

Rotate preview 90 ° coun-
terclockwise.

Rotate preview 90 ° clock-
wise.

Camera Model

Model of camera used to take picture.

ImageSize

Size of picture (width × height) in pixels.

Exposure Comp.

Adjust exposure using slider or by entering value between –2 and +2 EV in text
box.

Unchanged

lists exposure compensation value at time picture was taken.

White Balance

Choose new value for white balance by selecting option from menu.

Un-

changed

lists white balance setting in effect at time picture was taken.

Option

Description

No change

No change.

Incandescent

New value suited to incandescent lighting.

Fluorescent

New value suited to white fl uorescent lighting.

High color rendering fl uorescent

New value suited to “cold” fl uorescent lighting.

Daylight

New value suited to direct sunlight.

Shade

New value suited to outdoor shade.

Cloudy

New value suited to overcast conditions.

Flash

New value suited to Nikon Speedlights.

10MP (4016 × 2616)

Output

Open picture at size of 4,016 × 2,616 pixels (available only if picture was taken
with D1

Preview

Appendix C

The Nikon NEF Plug-in

The Nikon NEF plug-in allows RAW and NEF images created with Nikon digital cameras to be
viewed in Adobe Photoshop. If the plug-in is installed, the following dialog will be displayed
when a RAW image is opened in Adobe Photoshop.

Summary of Contents for 4DIF


































































































































































Search results

Summary of Contents for 4DIF

Reviews:

Related manuals for 4DIF

Brands by name

Popular brands

Nikon 4DIF, User Manual

Search results

Summary of Contents for 4DIF

Reviews:

Related manuals for 4DIF

Brands by name

Popular brands