RAID Array Information
Clicking
RAID Information
takes you to the
RAID Array Information
page, which displays summary
information for each array that has been configured on the unit. This includes arrays that are being constructed
or rebuilt.
Figure 3-12:
RAID Array Information
page
There is an information block for each array, which contains the following information:
Table 3-1: RAID Array Information
Item
Contents
Title bar
The
Array name
,
Array number
, and
Enclosure
.
Array name
The user-defined name of the array. If no name has been assigned, this item
defaults to
Array #n
, where
n
is the
Array number
. The name can be changed on
the
Rename RAID Arrays
page (see
Array number
Reference number for the array, assigned in order of creation.
Enclosure
Reference number of the unit that houses the disks that make up this array.
Enclosure 0
is the main unit;
Enclosure 1
is the first expansion unit; and
Enclosure
2
is the second expansion unit.
Configured owner
Displays the RAID Controller to which this array is assigned. Can be changed on
the
RAID Array Ownership
page (see
Current owner
Displays the RAID Controller that is currently controlling this array. This may differ
from
Configured owner
if the assigned RAID Controller is restarting or has failed.
Array status/health
Displays the current status of the RAID array: fault tolerant, not fault tolerant,
Chapter 3: The Graphical User Interface — RAID Information
Nexsan High-Density Storage
User Guide
63