Nexsan BEAST Series, User Manual, Page: 156 / 267

Inbound replication
The Inbound Replication section contains the same information as can be found on the Replication
Information page. See Replication Information on page 87.
Clicking the Next button for a replica takes you to the Configure Replication page.
Figure 3-104: Configure Replication page for inbound replication
The Inbound Replication Details section displays the following information:
Table 3-24: Inbound Replication Details
Item Contents
Replica name The user-defined name of the replica.
Array The user-defined name of the array that the replica is on, the
controller which controls that array, and the enclosure where the
replica resides.
Capacity Displays the total data storage space of the replica, in terabytes (TB)
and binary gigabytes (GiB).
Current status Displays the current replication status. Possible values are Created ,
Idle , Running , Aborted , and Reference Snapshot is Missing .
Replication partner Displays a link to the Nexsan High-Density Storage unit that houses
the source volume.
Source volume serial number Displays the unique serial number of the source volume.
Replica snapshot space used The amount of the replica’s snapshot reservation that is being used
by existing snapshots, in megabytes (MB) and binary gigabytes
Chapter 3: The Graphical User Interface — Configure Volumes
Nexsan High-Density Storage
User Guide
www.nexsan.com
156