28
02
| Transfortation and Installation
2.4
Installation
The installer must install and operate the robot in accordance with ISO 10218-2 and ISO 12100
guidelines and must comply with relevant requirements of international standards such as ISO /
TS 15066 and the national regulations.
Caution
The manufacturer is not responsible for any accidents that do not comply with
the relevant requirements of international standards and national regulations, or
that occur without reviewing the risk assessment described in Section 1.7.
Installation Locations
It is recommended to install the robot in a place that meets the following conditions.
no flammable or explosive material
no leakage
solid flat floor bearing the weight of the robot and the loads that occur during operation
temperature and humidity kept within the operating range of the robot and the control
box
little dust inflow
Caution
Failure to install the product in the recommended location may affect
performance and lifetime.
Installation Type
Robots can be installed on the floor in various forms.
[Example of fixed post]
[Example of folding mobile base]
Warning
If the base can be selectively moved or fixed, such as the foldable mobile base,
it must be fixed to the ground before the robot operates.
Summary of Contents for INDY7
