manualshive.com logo in svg

Netopia 3300-ENT Series, Firmware User Manual, Page: 65 / 334

Share
Download
Netopia 3300-ENT Series Firmware User Manual Download Page 65

System Configuration   3-21

The Add Ser ver Profile screen appears.

Configure your profile in the same way as described in 

“Adding a RADIUS Profile” on page 3-13

.

Note:

VLAN changes require a reboot to take effect. See 

“Restar ting the System” on page 11-8

.

                                 Add Server Profile

         Profile Name:                      Authentication Profile 2

         Remote Server Addr/Name:
         Remote Server Secret:
         Alt Remote Server Addr/Name:
         Alt Remote Server Secret:
         RADIUS Identifier:
         RADIUS Server Authentication Port: 1812

         ADD PROFILE                        CANCEL

Return accepts * ESC cancels * Left/Right moves insertion point * Del deletes.
Configure a new RADIUS or TACACS profile.

Summary of Contents for 3300-ENT Series















































































































































































































































































































































Reviews:

No comments