Netopia 3300-ENT Series, Firmware User Manual

Page: 271 / 334

Security 10-7
RADIUS server authentication
•
You select your desired mode by using the Security Databases pop-up menu.
•
Choosing Local Only , the default, selects the local authentication database. The database consists of
between one and four username and password pairs. This requires someone seeking menu console or
command line inter face configuration access to log in with a username and password when at least
one username and password pair have been configured locally in the router.
• Choosing Remote Only causes the router to ignore the local database and to authenticate users using
the configured RADIUS ser ver.
• Choosing Remote then Local causes the router to attempt to authenticate a user first using a RADIUS
ser ver and then, if that fails, using the local authentication database.
•
Choosing Remote then Lcl/Ser. Only causes the router to attempt to authenticate a user first using a
RADIUS ser ver and then, if that fails, using the local authentication database. If RADIUS authentica-
tion fails, the router will authenticate the user using the local authentication database only if the user
is accessing the menu console or CLI through the built-in serial console por t.
•
Choosing Local then Remote causes the router to attempt to authenticate a user first using the local
authentication database, and then, if that fails using the configured RADIUS ser ver.
Advanced Security Options
+---------------------------+
+---------------------------+
Remote Authentication... | Local only |
Security Databases... | Remote only |
Remote Server Addr/Name: | Remote then Local |
Remote Server Secret: | Remote then Lcl/Ser. Only |
Alt Remote Server Addr/Name: | Local then Remote |
Alt Remote Server Secret: +---------------------------+
RADIUS Identifier:
RADIUS Server Authentication Port: 1812
Remote Access Privileges... Custom
Telnet Server Port: 23
MAC Address Authentication...
LAN (Ethernet) IP Filter Set...
Remove Filter Set