Netopia 3300-ENT Series, Firmware User Manual

Page: 224 / 334

7-32 Firmware User Guide
4. Toggle or enter any IP parameters you require and return to the Add Connection Profile screen by pressing
Escape. For more information on NAT, see
“Multiple Network Address Translation,” beginning on page 4-1 .
The Local WAN IP Address is displayed for numbered or NAT profiles. The Local WAN IP Mask is displayed
for numbered profiles. The Remote IP Address and Remote IP Mask are displayed for unnumbered profiles.
5. Select ADD PROFILE NOW and press Return. Your new connection profile will be added.
If you want to view the connection profiles in your gateway, return to the WAN Configuration screen, and
select
Display/Change Connection Profile . The list of connection profiles is displayed in a scrolling pop-up
screen.
IP Profile Parameters
Address Translation Enabled: Yes
NAT Map List... Easy-PAT List
NAT Server List... Easy-Servers
NAT Options...
Stateful Inspection Enabled: No
Local WAN IP Address: 0.0.0.0
Filter Set...
Remove Filter Set
RIP Profile Options...
Toggle to Yes if this is a single IP address ISP account.
Configure IP requirements for a remote network connection here.
WAN Configuration
+-Profile Name---------------------IP Address------+
+--------------------------------------------------+
| Easy Setup Profile 127.0.0.2 |
| Profile 1 0.0.0.0 |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |on: Yes
| |
| |
| |
| |
+--------------------------------------------------+
Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.