Netopia 3300-ENT Series, Firmware User Manual

Page: 237 / 334

Line Backup 8-5
•
Select IP Profile Parameters . The IP Profile Parameters screen appears.
• Unless other wise instructed, accept the defaults, except the following:
• Set Remote IP Address to 127.0.0.2.
•
Set Remote IP Mask to 255.255.255.0.
These allow your ISP to supply your IP address and subnet mask when you connect via dial-up.
Press Escape to return to the Add Connection Profile screen.
• When you chose Backup for the Inter face Group, Telco Options became visible. Select Telco Options .
The Telco Options screen allows you to set the parameters for the modem connection.
IP Profile Parameters
Address Translation Enabled: Yes
IP Addressing... Unnumbered
NAT Map List... Easy-PAT List
NAT Server List... Easy-Servers
NAT Options...
Stateful Inspection Enabled: No
Local WAN IP Address: 0.0.0.0
Remote IP Address: 0.0.0.0
Remote IP Mask: 0.0.0.0
Filter Set...
Remove Filter Set
RIP Profile Options...
Toggle to Yes if this is a single IP address ISP account.
Configure IP requirements for a remote network connection here.