Netopia 3300-ENT Series, Firmware User Manual

Page: 51 / 334

System Configuration 3-7
You can edit or delete exposed address lists by selecting Show/Change Exposed Address List or Delete
Exposed Address List . A list of previously configured exposed addresses appears. This allows you to select an
exposed address list for editing or deletion.
Note:
Add, Edit, or Delete exposed addresses options are active only if NAT is disabled on a WAN inter face.
The hosts specified in exposed addresses will be allowed to receive inbound traffic even if there is no
corresponding outbound traffic.
Add Exposed Address List
+------Exposed Address Range---------Protocol-------------------+
+---------------------------------------------------------------+
| 192.168.1.10 192.168.1.12 TCP and UDP |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
| |
+---------------------------------------------------------------+
Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.