Netopia 3300-ENT Series, Firmware User Manual

Page: 170 / 334

6-4 Firmware User Guide
• A pop-up window displays a list of IKE Phase 1 Profiles that you have configured. If you have not previously
configured an IKE Phase 1 Profile, the selection
ADD PH1 PROFILE allows you to do that now.
Adding an IKE Phase 1 Profile
IKE Phase 1 Profiles contain the information that the two ends of a tunnel use to authenticate each other and
the parameters that govern the public key cr yptography exchanges that are required to generate new keys
periodically. Make sure to add an IKE Phase 1 Profile. If an IKE Phase 1 Profile is not assigned to an IKE
Connection Profile, all VPN traffic for that profile will be discarded.
Select ADD PH1 PROFILE . The Add IKE Phase 1 Profile screen appears.
+-IKE Phase1 Profile--+
+---------------------+
| <<ADD PH1 PROFILE>> |
| <<NONE>> |
Key Management... | |
IKE Phase 1 Profile| |
| |
Encapsulation... | |
| |
| |
| |
ESP Encryption Tran| |
ESP Authentication | |5-96
| |
Compression Type...| |
| |
| |
| |
Advanced IPsec Opti| |
| |
COMMIT +---------------------+
Up/Down Arrow Keys to select, ESC to dismiss, Return/Enter to Edit.
Add IKE Phase 1 Profile
Profile Name: IKE Profile 1
Mode... Aggressive Mode
Local Identity Type... IPv4 Address
Local Identity Value: 0.0.0.0
Remote Identity Type... IPv4 Address
Remote Identity Value: 0.0.0.0
Authentication Method... Shared Secret
Shared Secret: ********************
Encryption Algorithm... des
Hash Algorithm... md5
Diffie-Hellman Group... Group 2 (1024 bits)
Xauth Options...
Advanced IKE Phase 1 Options...
ADD IKE PHASE 1 PROFILE CANCEL