Netopia 3300-ENT Series, Firmware User Manual

Page: 72 / 334

3-28 Firmware User Guide
•
WPA Version : If you select either
WPA-802.1x
or
WPA-PSK
as your privacy setting, the
WPA Version
pop-up menu allows you to select the WPA version(s) that will be required for client connections. Choices
are:
• All
, for maximum interoperability,
• WPA Version 1 , for backward compatibility,
• WPA Version 2 , for maximum security.
All clients must suppor t the version(s) selected in order to successfully connect.
• WEP : Alternatively, you can provide a level of data security by enabling WEP (Wired Equivalent Privacy) for
encr yption of network data. You can enable 40-, 128-, or 256-bit WEP Encr yption (depending on the
capability of your client wireless card) for IP traffic on your LAN.
Wireless LAN Configuration
Enable Wireless: Yes
SSID: 7101 3245
Block Wireless Bridging: No
Channel... +---------------------------+
AutoChannel... +---------------------------+
Closed System... | All |
Enable Privacy... | WPA Version 1 |
WPA Version... | WPA Version 2 |
Pre Shared Key: +---------------------------+
Wireless Multiple SSID Setup...
MAC Address Authentication...