5-10 Firmware User Guide
•
You can specify that this Router will
Initiate Connections
(acting as a PAC) or only answer them (acting as
a PNS).
•
Tunnels are normally initiated
On Demand
; however, you can disable this feature. When disabled, the
tunnel must be manually established or may be scheduled using the scheduled connections feature. See
"Scheduled Connections" on page 2-16
.
•
You can specify the
Idle Timeout
(in seconds), an inactivity timer, whose expiration will terminate the
tunnel. A value of zero disables the timer. Because tunnels are subject to abrupt termination when the
underlying datalink is torn down, use of the Idle Timeout is strongly encouraged.
•
Return to the Connection Profile screen by pressing Escape.
•
Select
IP Profile Parameters
and press Return.
•
In the
Profile Parameters
screen, enter the
Remote IP Address
and
Remote IP Mask
for the host to which
you want to tunnel. Press Escape to return to the Connection Profile screen. Select
COMMIT
and press
Return. The tunnel Connection Profile will be activated.
Summary of Contents for 3300-ENT Series
