Netopia 3300-ENT Series, Firmware User Manual

Page: 59 / 334

System Configuration 3-15
The Add Ser ver Profile screen appears.
The Add Ser ver Profile screen allows you to specify the RADIUS ser ver and its authentication credentials to
be associated with your VLAN.
•
Profile Name – Enter a descriptive name for the profile, up to 35 characters.
•
Remote Server Addr/Name – Enter the IP address or fully qualified ser ver name.
• Remote Server Secret – Enter the ser ver CHAP secret.
• Alt Remote Server Addr/Name – If you have an alternate RADIUS ser ver, enter the IP address or
ser ver name here, as above.
•
Alt Remote Server Secret – If you have an alternate RADIUS ser ver, enter the ser ver CHAP secret
here, as above.
•
RADIUS Identifier – Enter the RADIUS Network Access Ser ver (NAS) identifier. The default NAS identi-
fier is an ASCII representation of the ser ver’s base MAC address.
• RADIUS Server Authentication Port – Ordinarily, the RADIUS ser ver por t number is 1812. If you are
using a different por t number, enter it here.
Select ADD PROFILE and press Return. You will be returned to the Add VLAN screen.
Select ADD VLAN and press Return.
Add Server Profile
Profile Name: Authentication Profile 1
Remote Server Addr/Name:
Remote Server Secret:
Alt Remote Server Addr/Name:
Alt Remote Server Secret:
RADIUS Identifier:
RADIUS Server Authentication Port: 1812
ADD PROFILE CANCEL
Return accepts * ESC cancels * Left/Right moves insertion point * Del deletes.
Configure a new RADIUS or TACACS profile.