manualshive.com logo in svg

NETGEAR FS700TS, Software Administration Manual

Share
Download
NETGEAR FS700TS Software Administration Manual Download Page 96

FS700TS Smart Switch Software Administration Manual

4-20

Configuring Switching Settings

v1.0, September 2007

To view VLAN untagged port members:

1.

Click 

Switching > VLAN > Advanced > VLAN Membership

. The VLAN Membership 

screen displays.

2.

Click 

UNTAGGED PORT MEMBERS

. The VLAN Untagged Ports screen opens:

Port PVID Configuration

The Port PVID Configuration screen contains parameters for assigning Port VLAN ID (PVID) 
values to interfaces. All ports must have a defined PVID. If no other value is configured the default 
VLAN PVID is used. VLAN ID 1 belongs to the default VLAN which cannot be deleted from the 
system. Once the PVID is changed from 1 to another VLAN ID on an interface, the default VLAN 
on that interface is automatically removed.

Figure 4-14

Summary of Contents for FS700TS































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands