FS700TS Smart Switch Software Administration Manual
8-6
Maintenance
v1.0, September 2007
File Management
The
File Management
menu contains the following option:
•
“Active Image”
Active Image
The Active Image screen enables the user to select which image will be set as active after the next
reset. The Active Image file for each unit in a stacking configuration can be individually selected.
To define the active image:
1.
Click
Maintenance > File Management > Active Image
.
The Active Image screen displays:
The Active Image screen contains the following fields:
•
Unit No.
– Displays the unit number for which the Image file is selected.
•
Active Image
– Displays the image file which is currently active on the unit.
•
After Reset
– Select the image file that is active after the specific unit is reset. The
possible field values are:
–
Image 1 – Activate Image file 1 after the device is reset.
–
Image 2 – Activate Image file 2 after the device is reset.
2.
Select the unit entry.
3.
Select the image file to be active in the
After Reset
provided field in the first row.
4.
Click
APPLY
to update the device. You must reset the device for the active image setting to
take effect. See
“Reset”
for detailed instructions on resetting the device.
Figure 8-5
Summary of Contents for FS700TS
Page 8: ...FS700TS Smart Switch Software Administration Manual viii Contents v1 0 September 2007 ...
Page 128: ...FS700TS Smart Switch Software Administration Manual 5 10 Configuring QoS v1 0 September 2007 ...
Page 186: ...FS700TS Smart Switch Software Administration Manual A 2 Default Settings v1 0 September 2007 ...
Page 190: ...Software Administration Manual Index 4 v1 0 September 2007 ...
