NETGEAR FS700TS, Software Administration Manual

Page: 122 / 190

FS700TS Smart Switch Software Administration Manual
5-4 Configuring QoS
v1.0, September 2007
The CoS Interface Configuration screen contains the following:
• Interface – Displays the interface for which the global QoS parameters are defined.
• Default CoS – Select the default CoS value for incoming packets for which a VLAN
priority (VPT) is not defined.
• Restore Defaults – Restore the factory CoS default settings to the selected port. The
possible field values are:
– Checked – Restore the factory CoS default settings to the ports.
– Unchecked – Maintain the current CoS settings.
2. Select the interface.
3. Select the Default CoS value from the list in the provided field in the first row.
4. Check or uncheck the Restore Defaults box in the interface entry row.
5. Click APPLY to update the device.
Queue
The Queue screen contains fields for defining the QoS queue forwarding types.
To set the queue settings:
1. Click QoS > CoS > Basic > Queue . The Queue screen displays:
The Queue screen contains the following fields:
• Strict Priority – Select to specify traffic scheduling based strictly on the queue priority.
• WRR – Select to assign WRR weights to queues. The queue weights are preconfigured
and are set to 1, 2, 4 and 8.
Figure 5-3