manualshive.com logo in svg

NETGEAR FS700TS, Software Administration Manual

Share
Download
NETGEAR FS700TS Software Administration Manual Download Page 82

FS700TS Smart Switch Software Administration Manual

4-6

Configuring Switching Settings

v1.0, September 2007

–

Up – The LAG is currently linked and forwarding traffic.

–

Down – The LAG is currently not linked.

•

Reactivate Suspended

 – Select the action to apply to a suspended LAG. The possible 

field values are:

–

Enable – Reactivate the suspended LAG.

–

Disable – Do not reactivate the suspended LAG.

•

Type

 – Displays the LAG type. The possible field values are:

–

Static – The LAG is configured manually.

–

LACP – The LAG is configured automatically.

•

Speed

 – Select the data transmission rate for the LAG. The LAG type determines what 

speed setting options are available. The possible field values are:

–

10M – The LAG is currently operating at 10 Mbps.

–

100M – The LAG is currently operating at 100 Mbps.

–

1000M – The LAG is currently operating at 1000 Mbps.

•

Duplex Mode 

– Select the duplex mode of the LAG. This field is configurable only when 

auto negotiation is disabled and the LAG speed is set to 10M or 100M. The possible field 
values are:

–

Half – The interface supports transmission between the device and the client in only 
one direction at a time.

–

Full – The interface supports transmission between the device and its link partner in 
both directions simultaneously.

–

Auto – The interface supports transmission between the device and the link partner 
based on the transmission mode of the link partner.

•

Auto Negotiation 

– Select the auto negotiation status of the LAG. Auto Negotiation is a 

protocol between two link partners that enables a port to advertise its transmission rate, 
duplex mode, and flow control abilities to its partner. Auto Negotiation is enabled by 
default. The possible field values are:

–

Enable – Enable auto negotiation.

–

Disable – Disable auto negotiation.

•

Flow Control

 – Select the flow control status of the LAG. Operates when the LAG is in 

full duplex mode. Flow Control is disabled by default. The possible field values are:

Summary of Contents for FS700TS































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands