manualshive.com logo in svg

NETGEAR FS700TS, Software Administration Manual

Share
Download
NETGEAR FS700TS Software Administration Manual Download Page 116

FS700TS Smart Switch Software Administration Manual

4-40

Configuring Switching Settings

v1.0, September 2007

The Dynamic Addresses screen contains the following field:

•

Address Aging 

– Enter the amount of time the MAC address remains in the Dynamic 

MAC Address table before it is timed out if no traffic from the source is detected. The 
range is 10 - 630 seconds. The default value is 300 seconds.

2.

Enter the Address Aging in the provided field in the first row.

3.

Click 

APPLY

 to update the device.

Address Table

The Advanced Address Table screen displays the MAC Address table according to the defined 
categories.

To query the Advanced MAC Address Table:

1.

Click 

Switching 

>

 Address Table 

>

 Advanced 

>

 Address Table

. The Advanced Address 

Table screen displays:

The Advanced Address Table screen contains the following fields:

•

Search By

 – Display the MAC Address which

 

can be sorted according to VLAN ID, 

MAC Address or Interface. The possible field values are:

Figure 4-28

Summary of Contents for FS700TS































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands