FS700TS Smart Switch Software Administration Manual
3-6
Managing System Settings
v1.0, September 2007
•
Time
– Enter the local system time. The field format is HH:MM:SS.
For example: 21:15:03.
•
Time Zone Offset
– Select the difference between Greenwich Mean Time (GMT) and
local time. For example, the Time Zone Offset for Paris is GMT +1, while the Time Zone
Offset for New York is GMT –5.
2.
Select the
Clock Source
by selecting either
Local
or
SNTP
.
3.
If you selected
Local
, then enter the local
Date
and
Time
in the provided fields.
4.
Select the
Time Zone Offset
from the list.
5.
Click
APPLY
to update the system settings.
Note:
If you selected
SNTP
, you must configure the SNTP servers. See
“SNTP Server
Configuration”
for detailed instructions on configuring the SNTP servers.
SNTP Server Configuration
The SNTP Server Configuration screen allows network administrators to define primary and
secondary SNTP servers. The system time is first retrieved through the primary SNTP server. If
the device is unable to retrieve the system time through the primary server, the device retrieves the
system time from the secondary server.
To configure SNTP servers:
1.
Click
System > Management > Time > SNTP Server Configuration
. The SNTP Server
Configuration screen displays:
The SNTP Server Configuration screen contains the following fields:
•
SNTP Server 1
– Enter the primary SNTP server IP address.
The Primary SNTP server is
the first server used to retrieve the system time. The following option is available:
–
Delete – Remove the currently configured SNTP Server 1.
Figure 3-4
Summary of Contents for FS700TS
Page 8: ...FS700TS Smart Switch Software Administration Manual viii Contents v1 0 September 2007 ...
Page 128: ...FS700TS Smart Switch Software Administration Manual 5 10 Configuring QoS v1 0 September 2007 ...
Page 186: ...FS700TS Smart Switch Software Administration Manual A 2 Default Settings v1 0 September 2007 ...
Page 190: ...Software Administration Manual Index 4 v1 0 September 2007 ...
