NETGEAR FS700TS Software Administration Manual Download Page 107

Page: 107 / 190

FS700TS Smart Switch Software Administration Manual

Configuring Switching Settings

4-31

v1.0, September 2007

Select the

Status

from the list in the provided field in the first row.

Click

APPLY

to update the device.

Advanced

The Multicast

Advanced

menu contains the following options:

•

“IGMP Snooping Configuration”

•

“Multicast Group Configuration”

•

“Multicast Group Membership”

•

“Multicast Forward All”

IGMP Snooping Configuration

To configure Advanced IGMP Snooping:

Click

Switching > Multicast > Advanced > IGMP Snooping Configuration

The Advanced

IGMP Snooping Configuration screen displays:

The IGMP Snooping Configuration screen contains the following fields:

IGMP Snooping Configuration

•

Status –

Select the IGMP Snooping status on the device. IGMP Snooping is operational if

both the Status and Bridge Multicast Filtering fields are enabled. The possible field values
are:

–

Enable – Enable IGMP Snooping on the device.

Figure 4-21

Summary of Contents for FS700TS































































































































































































Search results

Summary of Contents for FS700TS

Reviews:

Brands by name

Popular brands

NETGEAR FS700TS, Software Administration Manual

Search results

Summary of Contents for FS700TS

Reviews:

Brands by name

Popular brands