manualshive.com logo in svg

NETGEAR FS700TS, Software Administration Manual

Share
Download
NETGEAR FS700TS Software Administration Manual Download Page 94

FS700TS Smart Switch Software Administration Manual

4-18

Configuring Switching Settings

v1.0, September 2007

To define VLAN group membership: 

1.

Click 

Switching > VLAN > Advanced > VLAN Membership

. The VLAN Membership 

screen displays:

The VLAN Membership screen contains the following fields:

•

VLAN ID 

– Select the VLAN ID to be displayed and configured. VLAN ID = 1 cannot be 

modified.

•

VLAN Name

 – Displays the name of the VLAN.

•

VLAN Type 

– Displays the VLAN type. The possible field values are:

–

Static – The VLAN is user-defined.

–

Default – The VLAN is the default VLAN. The default VLAN is enabled.

•

Group Operation

 – Select the VLAN membership for all ports and LAGs. The possible 

field values are: 

–

Tag All – Defines all selected interfaces as tagged VLAN members. Packets 
belonging to the respective VLAN are tagged. The packets contain VLAN 
information.

–

Untag All – Defines all selected interfaces as untagged VLAN members. Packets 
belonging to the respective VLAN are untagged.

–

Remove All – Remove all the interfaces participating in the VLAN.

Figure 4-12

Summary of Contents for FS700TS































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands