manualshive.com logo in svg

NETGEAR FS700TS, Software Administration Manual

Share
Download
NETGEAR FS700TS Software Administration Manual Download Page 10

FS700TS Smart Switch Software Administration Manual

x

About This Manual

v1.0, September 2007

•

Chapter 6, “Managing Security”

 describes how to configure security.

•

Chapter 7, “Monitoring the Switch”

 describes how to configure switch monitoring.

•

Chapter 8, “Maintenance”

 describes the firmware upgrade procedure and reset functions.

•

Chapter 9, “Online Help”

 describes how to obtain online help and support.

•

Appendix A, “Default Settings”

 gives FS700TS Smart Switch specifications and lists default 

feature values.

Conventions, Formats, and Scope

The conventions, formats, and scope of this manual are described in the following paragraphs:

•

Typographical Conventions. 

This manual uses the following typographical conventions:

•

Formats. 

This manual uses the following formats to highlight special messages:

Note: 

Refer to the product release notes for the FS700TS Smart Switch Software 

application level code. The release notes detail the platform specific functionality 
of the Switching, SNMP, Config, and Management packages.

Italics

Emphasis, books, CDs, file and server names, extensions

Bold

User input, IP addresses, GUI screen text

Fixed

Command prompt, CLI text, code 

italics

URL links

Note: 

This format is used to highlight information of importance or special interest.

Tip: 

This format is used to highlight a procedure that will save time or resources.

Warning: 

Ignoring this type of note may result in a malfunction or damage to the 

equipment.

Summary of Contents for FS700TS































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands