NETGEAR FS700TS Software Administration Manual Download Page 178

Page: 178 / 190

FS700TS Smart Switch Software Administration Manual

8-4

Maintenance

v1.0, September 2007

To back up files:

Click

Maintenance > Upload

. The Upload screen displays:

The Upload screen contains the following fields:

•

File Type

– Enter the file type of the file to be uploaded. The possible field values are:

–

Firmware – Upload the Firmware File.

–

Configuration – Upload the Configuration File.

•

TFTP Server IP

– Enter the TFTP Server IP Address to which the Firmware or

Configuration file is uploaded.

•

Remote Filename

– Enter the destination file name to be uploaded.

Select Firmware or Configuration as the upload

File Type

from the provided field.

Enter the

TFTP Server IP

address in the provided field.

Enter the upload

Remote Filename

in the provided field.

Click

APPLY

to upload the file.

Download

The

Download

menu contains the following option:

•

“Download”

Download

System files can be downloaded using the Download screen.

Figure 8-3

Summary of Contents for FS700TS































































































































































































Search results

Summary of Contents for FS700TS

Reviews:

Brands by name

Popular brands

NETGEAR FS700TS, Software Administration Manual

Search results

Summary of Contents for FS700TS

Reviews:

Brands by name

Popular brands