manualshive.com logo in svg

NETGEAR FS700TS, Software Administration Manual

Share
Download
NETGEAR FS700TS Software Administration Manual Download Page 91

FS700TS Smart Switch Software Administration Manual

Configuring Switching Settings

4-15

v1.0, September 2007

To define VLAN properties:

1.

Click 

Switching > VLAN > Basic > VLAN Configuration

. The Basic VLAN Configuration 

screen displays:

The Basic VLAN Configuration screen contains the following fields:

•

VLAN ID 

– Enter the VLAN ID. The field range is 1-4093.

•

VLAN Name 

– Enter the user-defined VLAN name.

•

Type 

– Displays the VLAN type. The possible field values are:

–

Static – The VLAN is user-defined.

–

Default – The default VLAN ID is 1. It cannot be modified by the user.

2.

Select the VLAN entry.

3.

Enter the 

VLAN ID

 and 

VLAN Name

 in the provided fields in the first row.

4.

Click 

APPLY

 to update the device.

To add a new VLAN:

1.

Click 

Switching > VLAN > Basic > VLAN Configuration

. The Basic VLAN Configuration 

screen displays.

2.

Enter the 

VLAN ID

 and 

VLAN Name

 in the provided fields in the first row.

3.

Click 

ADD

 to update the device.

To remove a VLAN:

1.

Click 

Switching > VLAN > Basic > VLAN Configuration

. The Basic VLAN Configuration 

screen displays.

Figure 4-10

Summary of Contents for FS700TS































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands