manualshive.com logo in svg

NETGEAR FS700TS, Software Administration Manual

Share
Download
NETGEAR FS700TS Software Administration Manual Download Page 110

FS700TS Smart Switch Software Administration Manual

4-34

Configuring Switching Settings

v1.0, September 2007

4.

Click 

APPLY

 to update the device.

Multicast Group Membership

The Multicast Group Membership screen displays the ports and LAGs attached to the selected 
VLAN and the Multicast service group. The Port and LAG tables also reflect the manner in which 
the port or LAGs joined the Multicast group. 

To configure Multicast group membership:

1.

Click 

Switching > Multicast > Advanced > Multicast Group Membership

.

 

The Multicast 

Group Membership screen displays:

The Multicast Group Membership screen contains the following information:

Multicast Group Membership

•

VLAN ID 

– Enter the VLAN ID.

•

VLAN Name 

– Displays the user defined VLAN name.

•

Multicast Address 

– Enter the Multicast group MAC address.

Multicast Group

•

Interface

 – Displays the ports and LAGs for which the Multicast settings are displayed.

Figure 4-23

Summary of Contents for FS700TS































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands