manualshive.com logo in svg

NETGEAR FS700TS, Software Administration Manual

Share
Download
NETGEAR FS700TS Software Administration Manual Download Page 146

FS700TS Smart Switch Software Administration Manual

6-18

Managing Security

v1.0, September 2007

The MAC Configuration screen contains the following fields:

MAC Configuration

•

Current number of ACL

 – Displays the current number of user-defined ACLs.

MAC ACL Table

•

Name 

– Enter the user-defined MAC based ACL name. 

•

Number of Rules

 – Displays the current number of rules in the ACL.

2.

Select the ACL entry.

3.

Enter the new ACL Name in the provided field in the first row.

4.

Click

 

APPLY

 to update the device.

To add a new MAC-based ACL entry:

1.

Click

 

Security > ACL > Basic > MAC ACL

. The MAC Configuration screen displays.

2.

Enter the ACL Name in the provided field in the first row.

3.

Click 

ADD

 to update the device.

To remove a MAC-based ACL entry:

1.

Click

 

Security > ACL > Basic > MAC ACL

. The MAC Configuration screen displays.

2.

Select the ACL entry.

3.

Click 

DELETE

 to remove the entry.

Summary of Contents for FS700TS































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands