manualshive.com logo in svg

NETGEAR FS700TS, Software Administration Manual

Share
Download
NETGEAR FS700TS Software Administration Manual Download Page 156

FS700TS Smart Switch Software Administration Manual

7-6

Monitoring the Switch

v1.0, September 2007

To view the message logs in Flash:

1.

Click 

Monitoring > Logs > Flash Log

. The Flash Log screen displays:

The Flash Log screen contains the following fields:

•

Log Index 

– Displays the log number.

•

Log Time

 – Displays the time at which the log was generated.

•

Severity

 – Displays the log severity and urgency level.

 

The following are the available log 

severity levels:

–

Emergency – The highest warning level. If the device is down or not functioning 
properly, an emergency log message is saved to the specified logging location.

–

Alert – The second highest warning level. An alert log is saved, if there is a serious 
device malfunction; for example, all device features are down.

–

Critical – The third highest warning level. A critical log is saved if a critical device 
malfunction occurs; for example, two device ports are not functioning, while the rest 
of the device ports remain functional.

–

Error – A device error has occurred; for example, if a single port is offline.

–

Warning – The lowest level of a device warning. The device is functioning, but an 
operational problem has occurred.

–

Notice – Provides device information.

–

Informational – Provides device information.

–

Debug – Provides debugging messages.

•

Description

 – Displays the log message text.

Figure 7-4

Summary of Contents for FS700TS































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands