manualshive.com logo in svg

NETGEAR FS700TS, Software Administration Manual

Share
Download
NETGEAR FS700TS Software Administration Manual Download Page 95

FS700TS Smart Switch Software Administration Manual

Configuring Switching Settings

4-19

v1.0, September 2007

2.

Select the 

VLAN ID

 from the list in the provided field.

3.

Select the 

Group Operation

 from the list in the provided field.

4.

Click 

APPLY

 to update the device.

To tag or untag selected ports or LAGs:

1.

Click 

Switching > VLAN > Advanced > VLAN Membership

. The VLAN Membership 

screen displays.

2.

Click a gold button to display the ports or LAGs.

3.

Click the boxes below the selected ports or LAGs to mark them as tagged (

T

) or untagged (

U

).

4.

Click 

APPLY

 to update the device.

To tag or untag all the ports within a stacking unit or all the LAGs:

1.

Click 

Switching > VLAN > Advanced > VLAN Membership

. The VLAN Membership 

screen displays.

2.

Click the stacking unit’s quick box or the LAG quick box, repeatedly if necessary, until a 

T

 or 

U 

appears in the quick box, marking all the unit’s ports or LAGs as tagged or untagged, 

respectively.

3.

Click 

APPLY

 to update the device.

To view VLAN tagged port members:

1.

Click 

Switching > VLAN > Advanced > VLAN Membership

. The VLAN Membership 

screen displays.

2.

Click 

TAGGED PORT MEMBERS

. The VLAN Tagged Ports window opens:

Figure 4-13

Summary of Contents for FS700TS































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands