NETGEAR FS700TS, Software Administration Manual

Page: 57 / 190

FS700TS Smart Switch Software Administration Manual
Managing System Settings 3-23
v1.0, September 2007
• “Trap Configuration”
Community Configuration
Access rights are managed by defining communities in the Community Configuration screen.
When community names are changed, access rights are also modified.
To configure SNMP communities:
1. Click System > SNMP > SNMPv1/v2 > Community Configuration . The Community
Configuration screen displays:
The Community Configuration screen contains the following fields:
• Management Station – Enter the management station IP address for which the Basic
SNMP community is defined.
• Community String – Enter the password used to authenticate the management station to
the device.
• Access Mode – Select the access rights of the community. The possible field values are:
– Read Only – Management access is restricted to read-only. Changes cannot be made
to the device configuration and to the community.
– Read Write – Management access is read-write. Changes can be made to the device
configuration but not to the community.
– SNMP Admin – User has access to all device configuration options, as well as
permissions to modify the community.
2. Select the community entry.
3. Enter the Management Station and Community String in the provided fields in the first row.
4. Select the Access Mode from the list in the provided field in the first row.
Figure 3-12