![background image](http://html.mh-extra.com/html/nec/xen-topaz/xen-topaz_programming-manual_248488175.webp)
Program 21 to 25
Xen Topaz Programming Manual 168
P
ROGRAM
21: O
UTGOING
C
ALL
S
ETUP
21-14: W
ALKING
T
OLL
R
ESTRICTION
P
ASSWORD
S
ETUP
Description
Use
Program 21-13 : ISDN Calling Party Number Setup for Extensions
to assign each extension a Call-
ing Party Number (maximum 16 digits per entry). The calling number is the subscriber number of the dial-in
number. When a call is made by an extension which does not have an Extension Calling Number assigned
(Program 21-12), the system sends the calling number for the ISDN trunk defined in Program 21-13.
Note:
If the Calling Party Number is assigned in both Programs 21-12 and 21-13, the system sends the
data in Program 21-13.
Input Data
Conditions
None
Feature Cross Reference
♦
ISDN Compatibility
Telephone Programming Instructions
To enter data for Program 21-13 (Calling Party Number Setup for Extensions):
1. Enter the programming mode.
2. Enter 21 13
3. Enter the number of the item you want to program.
4. Select the Extension number to be programmed by pressing the FLASH or the VOLUME
▲
or
VOLUME
▼
keys.
5. Enter data for the item you se HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Extension Port Number
Max. 4 digits
Calling Party Number
Default
0-9,*,# (Max. 16 digits)
No setting
21-13-01 TEL200
PartyNo
21-13-xx TELxxxx
xxxxx
Summary of Contents for Xen Topaz
