NEC Xen Topaz, Programming Manual

Page: 114 / 343

Program 12 to 15
Xen Topaz Programming Manual 107
P
ROGRAM
15 E
XTENSION
B
ASIC
S
ETUP
15-13: L
OOP
K
EYS
Description
Use Program 15-13 : Loop Keys to assign the Loop Key data for each keyset telephone. Loop Keys can
be incoming, outgoing or both ways. Outgoing Loop Keys use the Data 1 options. Incoming Loop Keys use
the Data 2 option. Both Way Loop Keys use both the Data 1 and Data 2 options.
Input Data
Default
Programmable Function Key No. : 01-46
Data 1 (Outgoing) Option : 0 (Assigns the Loop Key for ARS)
Data 2 (Incoming) Option : 0 (Assigns the Loop Key to all trunk groups)
Conditions
None
Feature Cross Reference
♦
Loop Key
Telephone Programming Instructions
To enter data for Program 15-13(Loop Keys):
1. Enter the programming mode.
2. Enter 15 13
3. Enter the number of the item you want to program.
4. Select the Extension number to programmed by pressing the FLASH or the VOLUME ▲ or VOLUME ▼
keys.
5. Enter data for the item you se HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
COPY
Extension Number Max. 4 digits
Key Number (KTS with DLS) 01-46
Prog. No. Item
Input Data
15-13-01
Data 1(Outgoing)
Option
0-25
(0- Assigns the Loop Key for ARS, 1-25- Assigns
the Loop Key to the trunk group specified)
15-13-02
Data 2(Incoming)
Option
0-25
(0- Assigns the Loop Key to all trunk groups, 1-25-
Assigns the Loop key to the trunk group specified)
15-13-01 TEL200
OTG KY01 = 0
15-13-xx TELxxxx
xxxxx