![background image](http://html.mh-extra.com/html/nec/xen-topaz/xen-topaz_programming-manual_248488022.webp)
Xen Topaz Programming Manual 15
Program 10 to 11
P
ROGRAM
10: S
YSTEM
C
ONFIGURATION
S
ETUP
10-03: PCB S
ETUP
Description
Use
Program 10-03 : PCB Setup
to setup and confirm the Basic Configuration data for each PCB.
When changing a defined terminal type, first set the type to ‘0’ and then plug the new device in to have the
system automatically define it, alternatively redefine the type manually.
Program 10-03 allows the editing of installed units (PCB’s), you can not edit the settings if the slot is un-
used, install the PCB first then edit the settings.
Note:
The items highlighted in grey are read only and cannot be changed.
Input Data
For 308M/308E/008E Unit
Note 1)
Reference and a setup are possible only for a Station port.
For 2PGDU Unit
Slot Number
1-18
Physical Port Number
Extension : 1-8
Trunk : 9-11
Prog. No.
Item
Input data
Default
10-03-01
Terminal Type
0 : No setting
1 : Multi-Line Telephone
2 : Single Line Telephone
10 : DSS Console
13 : Trunk
3-9,11,12 : -Not Used-
0
10-03-02
Logical Port Number (see
Note
1
)
Station : 0-72
Trunk 0-51
0
10-03-03
Transmit Gain Level for SLT
1-63(-15.5…….+15.5dB)
32
(0dB)
10-03-04
Receive Gain Level for SLT
1-63(-15.5…….+15.5dB)
32
(0dB)
Related
Programming
33-01
Physical Port Number
1-4
IN
SA
SB
Summary of Contents for Xen Topaz
