![background image](http://html.mh-extra.com/html/nec/xen-topaz/xen-topaz_programming-manual_248488223.webp)
Program 21 to 25
Xen Topaz Programming Manual 216
P
ROGRAM
25: DID/DISA S
ETUP
25-10: T
RUNK
G
ROUP
R
OUTING
FOR
DISA
Description
Use
Program 25-10 : Trunk Group Routing for DISA
to assign the Trunk Group route chosen when a
user places a DISA call into the system and dials 9. Set Trunk Group Routing in Program 14-06. Enable or
disable the DISA caller’s ability to dial 9 in Program 20-14-02. You assign a route to each DISA Class of
Service (1-15). The system assigns a DISA Class of Service to a call based on the password the DISA
caller dials.
When programming, you make a separate entry for each Night Service Mode.
Input Data
Conditions
None
Feature Cross Reference
♦
Direct Inward System Access (DISA)
Telephone Programming Instructions
To enter data for Program 25-10(Trunk Group Routing for DISA):
1. Enter the programming mode.
2. Enter 25 10
3. Enter the number of the item you want to program.
4. Select the DISA User number to be programmed by pressing the FLASH or the VOLUME
▲
or
VOLUME
▼
keys.
5. Enter data for the item you se HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
DISA User Number
1-15
Day/Night Mode
Route Table Number
Default
1-8
0-25 (0 : No Setting)
1
25-10-01DISA-U1
Mode1 RouteTbl1
25-10-xxDISA-Uxx
xxxxx
Summary of Contents for Xen Topaz
