![background image](http://html.mh-extra.com/html/nec/xen-topaz/xen-topaz_programming-manual_248488234.webp)
Program 26 to 35
Xen Topaz Programming Manual 227
P
ROGRAM
26: ARS S
ERVICE
& L
EAST
C
OST
R
OUTING
26-05: LCR C
ARRIER
T
ABLE
Description
Use
Program 26-05 : LCR Carrier Table
to define the LCR Access Codes and routing options.
These options include Authorization codes and Cost Centre Codes.
Input Data
Conditions
The settings must comply with the requirements of the Indirect Carrier.
The operation of the @ symbol within the Access Code depend on the type of trunk. For ISDN trunks the @
symbol defines that a Connect Message is received and then DTMF digits are sent in the B-Channel.
Feature Cross Reference
♦
Least Cost Routing
Telephone Programming Instructions
To enter data for Program 26-05 (LCR Carrier Table):
1. Enter the programming mode.
2. Enter 26 05
3. Enter the number of the item you want to program.
4. Select the Carrier Table number to be programmed by pressing the FLASH or the VOLUME
▲
or
VOLUME
▼
keys.
5. Enter data for the item you se HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Carrier Table Number
1-25
Prog. No.
Description
Input Data
Default
Related
Program
26-05-01
Delete Digits
Enter the quantity of leading dig-
its that need to be deleted
0-16
0
26-05-02
Access Code (Add Digits)
Enter the Access Code and Op-
tion to route to the Indirect Carrier
Max. 16 digits (0-
9,*,#,@,Pause)
No setting
26-05-03
Authorization Code Table
Enter the table number that con-
tains the correct Authorization
code.
0-10
0
26-05-04
Cost Centre Code
Optionally enter a cost centre
code.
0 : Not used
1 : Used
0
26-05-01CarTBL1
Delete digit 0
26-05-xx
CarTBLxx
xxxxx
Summary of Contents for Xen Topaz
