Program 21 to 25
Xen Topaz Programming Manual 167
P
ROGRAM
21: O
UTGOING
C
ALL
S
ETUP
21-13: ISDN C
ALLING
P
ARTY
N
UMBER
S
ETUP
FOR
E
XTENSIONS
Description
Use
Program 21-12 : ISDN Calling Party Number Setup for Trunks
to assign Calling Party Numbers for
each trunk (maximum 16 digits per entry). When a call is made by an extension which does not have an
Extension Calling Number assigned (Program 21-13), the system sends the calling number for the ISDN
trunk defined in 21-12.
Note:
If the Calling Party Number is assigned in both Programs 21-12 and 21-13, the system sends the
data in Program 21-13.
Input Data
Conditions
None
Feature Cross Reference
♦
ISDN Compatibility
Telephone Programming Instructions
To enter data for Program 21-12 (ISDN Calling Party Number Setup for Trunks):
1. Enter the programming mode.
2. Enter 21 12
3. Enter the number of the item you want to program.
4. Select the Trunk port number to be programmed by pressing the FLASH or the VOLUME
▲
or
VOLUME
▼
keys.
5. Enter data for the item you se HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Trunk Port Number
1-51
Calling Party Number
Default
0-9,*,# (Max. 16 digits)
No setting
21-12-01 Trunk1
PartyNo
21-12-xx Trunkxx
xxxxx
Summary of Contents for Xen Topaz
