![background image](http://html.mh-extra.com/html/nec/xen-topaz/xen-topaz_programming-manual_248488037.webp)
Xen Topaz Programming Manual 30
Program 10 to 11
P
ROGRAM
11: S
YSTEM
N
UMBERING
11-01: S
YSTEM
N
UMBERING
Step 3: Assign a function to the code selected
After entering a code and specifying its length, you must assign its function. This is the Dial Type column in
the
System Numbering
(page
52) table. The choices are:
1 Changing the
Dial Type
for a range of codes can have a dramatic affect on how your system operates.
Assume, for example, the site is a hotel that has room numbers from 100-399. In order to make extension
numbers correspond to room numbers, you should:
- In Program 11-02, reassign extension numbers on each floor from 100 to 399.(Other applications might
also require you to change entries in Program 11-10 through 11-16.)
System Numbering table;
IN
SA
SB
Dial Types
Dial Type Description
Related Program
0 -Not
Used-
1
Service Code
11-10: Service Code Setup (for System Administrator)
11-11: Service Code Setup (for Setup/Entry)
11-12: Service Code Setup (for Service Access)
11-15: Service Code Setup (for Special Access)
2
Extension Number
11-02: Extension Number
11-04: Virtual Extension Number
11-06: ACI Extension Numbering
11-07: Department Calling Group Numbers
11-08: ACI Group Pilot Number
3
Trunk Access Number
11-09: Trunk Access Code
4
Special Trunk Access
11-09: Trunk Access Code
5
Operator Access
20-17: Operator’s Extension
6 ARS/F-Route
Access
44-xx
Summary of Contents for Xen Topaz
