![background image](http://html.mh-extra.com/html/nec/xen-topaz/xen-topaz_programming-manual_248488184.webp)
Program 21 to 25
Xen Topaz Programming Manual 177
P
ROGRAM
22: I
NCOMING
C
ALL
S
ETUP
22-07: DIL A
SSIGNMENT
Description
Use
Program 22-07 : DIL Assignment
to assign the destination extension or Department Calling Group for
each DIL Incoming trunk. A DIL rings an extension directly, without any other Access Map or Ring Group
programming. If an extension has a line key, the DIL rings the line key. If the extension does not have a line
key, the DIL rings loop keys (if programmed) or the CALL key (CALL key will always ring). Use Program 22-
02 to designate a trunk as a DIL). You can make eight DIL assignments, one for each Night Service mode:
Input Data
Conditions
None
Feature Cross Reference
♦
Direct Inward Line (DIL)
Telephone Programming Instructions
To enter data for Program 22-07(DIL Assignment):
1. Enter the programming mode.
2. Enter 22 07
3. Enter the number of the item you want to program.
4. Select the Trunk number to be programmed by pressing the FLASH or the VOLUME
▲
or VOLUME
▼
keys.
5. Enter data for the item you se HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Trunk Port Number
1-51
Day/Night
Mode
Number of Transferring Destina-
tion
Default
Related Program
1-8
Extension number (Max. 4 digits)
Department Group number (Max.4
digits)
No setting
22-02
22-07-01 Trunk1
Mode1 No =
22-07-xx Trunkxx
xxxxx
Summary of Contents for Xen Topaz
