![background image](http://html.mh-extra.com/html/nec/xen-topaz/xen-topaz_programming-manual_248488186.webp)
Program 21 to 25
Xen Topaz Programming Manual 179
P
ROGRAM
22: I
NCOMING
C
ALL
S
ETUP
22-09: DID B
ASIC
D
ATA
S
ETUP
Description
Use
Program 22-09 : DID Basic Data Setup
to define the basic setting of Dial-In incoming calls for each
trunk group.
Input Data
Conditions
None
Feature Cross Reference
♦
Direct Inward Dialling (DID)
IN
SA
SB
Trunk Group Number
1-25
Prog. No.
Item
Input Data
Default
22-09-01
Expected Number of Digits
Enter the number of digits the table expects
to receive from the telco. Use this program to
make the system compatible with three- and
four-digit DID
service
1-8 4
22-09-02
Received Vacant Number Operation
Use this option to enable or disable Vacant
Number Intercept.
0 : Disconnect
1 : Transfer (Program 22-12)
0
22-09-03
Sub-addressing Mode
0 : Extension Number specify
1 : DID Conversion Table
0
22-09-04
DID Receiving Mode for ISDN
0 : Enbloc receiving
1 : Overlap receiving
0
22-09-05
Local Code Digits
(Only Overlap Receiving Mode)
0-15 (0 : No Local Code)
0
22-09-06
Local Code
(Only Overlap Receiving Mode)
Dial (Max. 16 digits)
No setting
22-09-07
Pilot Code
(Only Overlap Receiving Mode)
Dial (1 digit : 0-9)
No setting
22-09-08
T302 Time-out Operation
(Only Overlap Receiving Mode)
0 : Disconnect
1 : Transfer (Program 22-12)
0
Summary of Contents for Xen Topaz
