![background image](http://html.mh-extra.com/html/nec/xen-topaz/xen-topaz_programming-manual_248488156.webp)
Program 16 to 20
Xen Topaz Programming Manual 149
P
ROGRAM
20: S
YSTEM
O
PTION
S
ETUP
20-25: ISDN O
PTIONS
Description
Use
Program 20-25 : ISDN Options
to define the ISDN system options.
Default
Conditions
None
Feature Cross Reference
♦
ISDN Compatibility
IN
SA
SB
Prog. No.
Item
Input data
Default
20-25-01
Send the Release Message After Subscriber Hang
Up
0 : Service Off
1 : Service On
1
20-25-02
Progress Indicate Information element detect
1
20-25-03
Bearer Capability select from SLT Outgoing
0 : 3.1kHz Audio
1 : Speech
0
20-25-04
Send DT Until User Dials the First Digit (Overlap
Sending Mode)
With Overlap Sending Mode, if the network side stops
dial tone when CLI is included in the SETUP mes-
sage, the system sends dial tone until the user dials
the first digit instead of the network.
0 : Service Off
1 : Service On
0
20-25-05
T305 Timer Start After Sending Disconnect Message
1
20-25-06
Call Proceeding Send Mode
1
20-25-07
Busy Tone Mode Set When Disconnect Message Re-
ceived
0
20-25-08
Use of Low Layer Compatibility (LLC)
1
20-25-09
Use of High Layer Compatibility (HLC) Sending
1
20-25-10
S-Point Terminal Seizes Analogue Trunk
0
20-25-11
Automatic Changing System Clock When Date/Time
Information Element Received
1
20-25-12
Incoming Calls Forwarded Out Automatically Return
Connect Message When Outgoing Call Receives
Alerting Message
0
20-25-13
Use busy tone when trunk call receives RELEASE
message
0
Summary of Contents for Xen Topaz
