![background image](http://html.mh-extra.com/html/nec/xen-topaz/xen-topaz_programming-manual_248488289.webp)
Program 40 to 92
Xen Topaz Programming Manual 282
P
ROGRAM
44: ARS/F-R
OUTE
S
ETUP
44-07: G
AIN
T
ABLE
FOR
F-R
OUTE
A
CCESS
Description
Use
Program 44-07 : Gain Table for ARS/F-Route Access
to set the PAD table. If an extension dials
ARS/F-Route number;
•
The Extension Dial Gain Table is activated, which is assigned in Program 44-05.
•
The Extension Dial Gain Table follows “Outgoing transmit” and “Outgoing receive” settings.
If the incoming call is transferred to another line using ARS/F-Route;
•
The Tandem Gain Table is activated, which is assigned in Program 44-05.
•
The Tandem Gain Table follows the “Incoming transmit” and “Incoming receive” settings for incoming line,
and “Outgoing transmit” and “Outgoing receive” settings for the outgoing line.
Note:
For the ARS/F-Route call (in the above case), CODEC gain in Program 14-01-02 and 14-01-03 are
not activated
Input Data
Conditions
None
Feature Cross Reference
Automatic Route Selection (ARS)/F-Route
Telephone Programming Instructions
To enter data for Program 44-07(Gain Table for ARS/F-Route Access):
1. Enter the programming mode.
2. Enter 44 07
3. Enter the number of the item you want to program.
4. Select the Gain Table number to be programmed by pressing the FLASH or the VOLUME
▲
or
VOLUME
▼
keys.
5. Enter data for the item you se HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
Gain Table Number
1-500
Prog. No.
Item
Input Data
Default
Related
Program
44-07-01
Incoming Transmit
1-63 (-15.5…..+15.5)
32(0dB)
44-07-02
Incoming Receive
1-63 (-15.5…..+15.5)
32(0dB)
44-07-03
Outgoing Transmit
1-63 (-15.5…..+15.5)
32(0dB)
44-07-04
Outgoing Receive
1-63 (-15.5…..+15.5)
32(0dB)
44-07-01 Gain1
INC Transmit 32
44-07-xx Gainxx
xxxxx
Summary of Contents for Xen Topaz
