![background image](http://html.mh-extra.com/html/nec/xen-topaz/xen-topaz_programming-manual_248488029.webp)
Xen Topaz Programming Manual 22
Program 10 to 11
P
ROGRAM
10: S
YSTEM
C
ONFIGURATION
S
ETUP
10-08: P
RE
-
RINGING
S
ETUP
Description
Use
Program 10-08 : Pre-Ringing Setup
to enable or disable pre-ringing for trunk calls. This sets how a
trunk initially rings a telephone. With pre-ringing, a burst of ringing occurs as soon as the trunk’s LED
flashes. The call then continues ringing with the normal ring cadence cycle. Without pre-ringing, the call
starts ringing only when the normal ring cadence cycle occurs. This may cause a ring delay, depending on
when call detection occurs in reference to the ring cycle.
Input Data
Conditions
None
Feature Cross Reference
♦
Central Office Calls, Answering
Telephone Programming Instructions
To enter data for Program 10-08 (Pre-Ringing Setup):
1. Enter the programming mode.
2. Enter 10 08
3. Enter the number of the item you want to program.
4. Enter data for the item you se HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
COPY
Input Data
Default
0 : disable
1 : enable
0
10-08-01
Pre-ringing
10-08-xx
xxxxx
Summary of Contents for Xen Topaz
