![background image](http://html.mh-extra.com/html/nec/xen-topaz/xen-topaz_programming-manual_248488110.webp)
Program 12 to 15
Xen Topaz Programming Manual 103
P
ROGRAM
15: E
XTENSION
B
ASIC
S
ETUP
15-10: I
NCOMING
V
IRTUAL
E
XTENSION
R
ING
T
ONE
O
RDER
S
ETUP
Description
Use
Program 15-10 : Incoming Virtual Extension Ring Tone Order Setup
to set the priority (1-4) for the
Virtual Extension Ring Tones set in Program 15-08. When Virtual Extension calls ring an extension simulta-
neously, the tone with the highest order number (e.g., 1) rings. The other keys just flash.
Input Data
Default
By default, Virtual Extension Ring tones have the following order.
Conditions
None
Feature Cross Reference
♦
Multiple Directory Number / Call Coverage
Telephone Programming Instructions
To enter data for Program 15-10(Incoming Virtual Extension Ring Tone Order Setup):
1. Enter the programming mode.
2. Enter 15 10
3. Enter the number of the item you want to program.
4. Select the Extension number to programmed by pressing the FLASH or the VOLUME
▲
or VOLUME
▼
keys.
5. Enter data for the item you se HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’ programming section.
IN
SA
SB
COPY
Extension Number
Max.
4
digits
Order
Data
Description
Related
Program
1-4
0 : Tone Pattern 1
1 : Tone Pattern 2
2 : Tone Pattern 3
3 : Tone Pattern 4
4 : Incoming Extension ring
tone
In the case of that two or more virtual ex-
tensions are set on a function key on the
keyset, and the tone pattern by which the
sound of each extension differs, the prior-
ity of ring sound is set up.
15-08
Order
Ring Tone
(Set in Program 15-08)
1
0 (Tone Pattern 1)
2
1 (Tone Pattern 2)
3
2 (Tone Pattern 3)
4
3 (Tone Pattern 4)
15-10-01 TEL200
Order1 RG Pttrn0
15-10-xx TELxxxx
xxxxx
Summary of Contents for Xen Topaz
