manualshive.com logo in svg

NEC SOPHO IP 5000, Command Reference Manual, Page: 88 / 191

Share
Download
NEC SOPHO IP 5000 Command Reference Manual Download Page 88

 

 

SOPHO 

IP 5000/SOPHO IP6000 

 

Command Reference Guide 

 

88

 

Example

 

 Enable Ethernet 1/0/0 to transmit NTP broadcast packets. No.4 key is used for 
encryption and NTP version number is set to 3.  

 

[NEC-PHILIPS] 

interface ethernet 1/0/0  

[NEC-PHILIPS-Ethernet1/0/0] 

ntp-service broadcast-server authentication-

key 4 version 3  

 
 

ntp-service max- 

Syntax  

dynamic-sessions  

ntp-service max-dynamic-sessions number  
undo ntp-service max-dynamic-sessions 

 

 

View 

 

System view  

 

Parameter  
number

: Number of sessions allowed to be established locally. It is in the range 

of 0 to (232-1).  

 

Description 

 

Using the 

ntp-service max-dynamic-sessions 

command, you can set the 

number of sessions allowed to be established locally. Using the 

undo ntp-

service max-dynamic-sessions 

command, you can restore the default 

number of the sessions.  

 

By default, 100 sessions are allowed to be established.  

 

Example 

 

Set the number of sessions the local allows to establish to 50.  
 
[NEC-PHILIPS] 

ntp-service max-dynamic-sessions 50 

 

 
 
ntp-service Syntax 
multicast-client  

ntp-service multicast-client [ X.X.X.X ] 
undo ntp-service multicast-client [ X.X.X.X ] 

 

View 

 

Interface view  

 

Parameter 

 

X.X.X.X

: Multicast IP address, which is a Class D address.  

 

Description 

 

Using the 

ntp-service multicast-client

 command, you can configure the NTP 

multicast client mode. Using the 

undo ntp-service multicast-client

 command, 

you can remove the NTP multicast client mode.  

 

By default, no multicast client service is configured and the X.X.X.X is 
224.0.1.1.  

 

This command is used to specify an interface on the local device to receive the 
NTP multicast packets. The local device is run in client mode. It first listens 
discreetly to the multicast packets from the server. When the first multicast 
packet is received, the local device enables a short client/server mode to 
exchange messages with the remote server in order to estimate network delay. 
Then it enters the client (multicast-client) mode to listen discreetly to the 
multicast packets and synchronize the local clock according to the coming 
multicast packets.  

Summary of Contents for SOPHO IP 5000
































































































































































































Reviews:

No comments