manualshive.com logo in svg

NEC SOPHO IP 5000, Command Reference Manual, Page: 127 / 191

Share
Download
NEC SOPHO IP 5000 Command Reference Manual Download Page 127

 

 

SOPHO 

IP 5000/SOPHO IP6000 

 

Command Reference Guide 

 

127

 

loopback  

Syntax  
loopback  
undo loopback  
 
View  

Ethernet interface view  
 

Parameter  

None  
 

Description  

Using the 

loopback

 command, you can enable an Ethernet interface to perform  

loopback. Using the 

undo loopback

 command, you can disable loopback.  

 
By default, the Ethernet interface is disabled to perform loopback.  
 
You must enable the Ethernet interface to perform loopback only for the 
purpose  of testing some special functions.  
 

Example  

Enable the Ethernet interface to perform loopback.  
 
[NEC-PHILIPS-Ethernet0/0/0]

loopback  

 
 

mtu  

Syntax  
mtu size  
undo mtu  
 
View  

Ethernet interface view  
 

Parameter  
size

: MTU size on the Ethernet interface, which is in bytes. It is in the range of 

46  to 1500 if the adopted frame format is Ethernet_II.  
 
 

Description  

Using the 

mtu

 command, you can set the maximum transmission unit (MTU) of  

the Ethernet interface.  
Using the 

undo mtu

 command, you can restore the  default configuration.  

 
MTU defaults to 1500 if the adopted frame format is Ethernet_II.  
 
The MTU setting of an Ethernet interface can affect the assembly and  
fragmentation of IP packets on the interface.  
 
For a related command, see 

display interface

.  

 

Example  

Set MTU of the Ethernet interface to 1492.  
 
[NEC-PHILIPS-Ethernet0/0/0]

mtu 1492  

 
 

speed  

Syntax  
speed { 10 | 100 | negotiation }  
undo speed  
 
View  

Ethernet interface view  
 

Summary of Contents for SOPHO IP 5000
































































































































































































Reviews:

No comments