manualshive.com logo in svg

NEC SOPHO IP 5000, Command Reference Manual

The NEC SOPHO IP 5000 is a state-of-the-art communication system designed to streamline your business communication. To unleash the full potential of this product, download the Command Reference Manual from our website absolutely free. Explore in-depth functionalities and optimize your experience with this comprehensive manual.

Share
Download
background image

 

 

SOPHO 

IP 5000/SOPHO IP6000 

 

Command Reference Guide 

 

187

 

This command is used in concert with the ppp mp mp-group command. Either  
MP-group interface or interface added in MP group can be configured first.  
 

Example  

Create MP-group interface 3/0/0.  
[NEC-PHILIPS] 

interface mp-group 3/0/0  

[NEC-PHILIPS-mp-group 3/0/0]  

 
 

ppp mp mp-group  

Syntax  
ppp mp mp-group number  
undo ppp mp mp-group number  
 
View  

Interface view  
 

Parameter  
number

: Number of MP-group interface  

 
Description  

Using the 

ppp mp mp-group

 command, you can add the current interface to a  

specified MP group. Using the 

undo ppp mp mp-group

 command, you can  

remove the current interface from a specified MP group.  
 
This command is used with the interface mp-group command. Either MP-group  
interface or interface added in MP group can be configured first.  
 
It should be noted that the interface added to an MP group must be consistent  
with the slot of the MP-group interface.   
 
In addition, the interface added to an MP group must be a physical interface.   
 
Tunnel interfaces do not support this command.  
 

Example  

Add serial port 3/0/0 to MP group 3.  
 
[NEC-PHILIPS] 

interface serial 3/0/0  

 
[NEC-PHILIPS-Serial3/0/0] 

ppp mp mp-group 3/0/0  

 
Remove serial port 3/0/0 from MP group 3/0/0.  
 
[NEC-PHILIPS-Serial3/0/0] 

undo ppp mp mp-group 3/0/0  

 

Summary of Contents for SOPHO IP 5000
































































































































































































Reviews:

No comments

Related manuals for SOPHO IP 5000

D-Link PowerLine DHP-W611AV User Manual preview
PowerLine DHP-W611AV
Brand: D-Link Pages: 78
B&B Electronics Elinx EIRP305-T User Manual preview
Elinx EIRP305-T
Brand: B&B Electronics Pages: 19
DBM ACE9600 Operating Manual preview
ACE9600
Brand: DBM Pages: 50
RuggedCom RUGGEDSWITCH RS900G Hardware Installation Manual preview
RUGGEDSWITCH RS900G
Brand: RuggedCom Pages: 23
US Robotics USR8700 User Manual preview
USR8700
Brand: US Robotics Pages: 156
XNET INS2000 Install Manual preview
INS2000
Brand: XNET Pages: 17
Patton electronics 1018RC User Manual preview
1018RC
Brand: Patton electronics Pages: 12
Brocade Communications Systems NetIron MLXe Series Hardware Installation Manual preview
NetIron MLXe Series
Brand: Brocade Communications Systems Pages: 305
Paradyne Hotwire 8775 MSDSL Installation Instructions Manual preview
Hotwire 8775 MSDSL
Brand: Paradyne Pages: 10
Aaeon FWS-7150 Manual preview
FWS-7150
Brand: Aaeon Pages: 57
Juniper NSM4000 Hardware Manual preview
NSM4000
Brand: Juniper Pages: 196
Dataprobe iBoot Instruction Manual preview
iBoot
Brand: Dataprobe Pages: 16
Amphenol C2LINX Series Installation Manual preview
C2LINX Series
Brand: Amphenol Pages: 43
Allied Telesis CentreCOM AT-3716XL Quick Install Manual preview
CentreCOM AT-3716XL
Brand: Allied Telesis Pages: 2
Multi-Link Power Stone Programming Manual preview
Power Stone
Brand: Multi-Link Pages: 31
MicroNova O047 Technical Installation Manual preview
O047
Brand: MicroNova Pages: 113
BinTec BIANCA/BRICK XS Quick Install Manual preview
BIANCA/BRICK XS
Brand: BinTec Pages: 2
Ericsson Baseband 6648 Manual preview
Baseband 6648
Brand: Ericsson Pages: 16

Brands by name

Popular brands

Load more brands