SOPHO
IP 5000/SOPHO IP6000
Command Reference Guide
32
info-center source
Syntax
info-center source { module-name | default } { channel { channel-number |
channel-name} } [ log { state { on | off } | level severity }* | trap { state { on |
off } | level severity } * | debug { state { on | off } | level severity }* ]*
undo info-center source { module-name | default } { channel { channel-
number | channel-name }
View
System view
Parameter
module-name
: Module name.
default
: Sets the default information record.
channel-number
: Information channel number to be set.
channel-name
: Information channel name to be set.
log
: Log information.
trap
: Alarm information.
debug
: Debugging information.
on
: Enables outputting information.
off
: Disables outputting information.
level
: Sets information level to disable the output of the information at a level
higher than the specified severity.
severity
: Information level. As shown in the following table, the info-center
divides information into eight levels by severity or emergency, with a lower level
indicating a more emergent event. emergencies indicates level 0 and debugging
indicates level 7.
Table 2
Definition of information level
Severity level
Description
emergencies
Extremely emergent errors
alerts
Errors requiring immediate correction
critical
Critical errors
errors
Errors that is not critical but require
your concern
warnings
Warning indicating that there may be
some errors
notifications
Information needs your concern
informational
Common prompt information
debugging
Debugging information
*: Indicate multiple choices can be selected. At least one choice must be
selected and all the choices can be selected at most.
Description
Using the
info-center source
command, you can add records to an information
channel. Using the
undo info-center source
command, you can remove the
records from the information channel.
For a specified module, by default,
